牵丝戏要表达什么:SSH 远程连接

来源:百度文库 编辑:偶看新闻 时间:2024/04/29 10:42:29

ssh远程连接

准备工作:

1 准备两台linux pc 我们一般用的是VMware虚礼软件

2 这两台linux可以互通

3 linux1 :192.168.2.2 这台为你要连接的服务器

linux2 :192.168.2.3

4 防火墙关闭

5 ssh这个套件一定要安装,不过默认的都是安装好的

操作步骤

linux客户机

[root@localhost~]#ssh-keygen -t rsa

Generating public/private rsa key pair.

Enter file in which to save the key (/root/.ssh/id_rsa):

Created directory '/root/.ssh'.

Enter passphrase (empty for no passphrase):--->这里可以让你的密钥再进行一次加密

Enter same passphrase again:--->这里再次输入上面相同的密码。

Your identification has been saved in /root/.ssh/id_rsa.

Your public key has been saved in /root/.ssh/id_rsa.pub.

The key fingerprint is:

c0:25:62:65:c9:24:bd:14:8d:01:dc:50:e0:f9:eb:a7 root@localhost.localdomain

[root@localhost~]#ls .ssh/

id_rsa id_rsa.pub

[root@localhost~]#scp .ssh/id_rsa.pub root@192.168.2.2:/root/

这句话是说将本机器生成的公钥拷贝到远程你要链接的服务器上,拷贝时要输入密码的。

到linux服务器上

[root@localhost~]#mkdir .ssh/

[root@localhost~]#mv id_rsa.pub .ssh/   -->这里将刚才拷贝过来的文件移致动到.ssh/下

[root@localhost~]#vim /ect/ssh/sshd_config

找到:PasswordAuthentication yes 改为 no --->说明不用密码验证,原本是用密码验证的。

找到:#AuthorizedkeysFile .ssh/authorized_keys 这个很重要过会会用到

##:PermitRootLogin no 这句是说是否允许root远程登录 no为不准,yes 为允许

!!保存退出

[root@localhost~]#cd .ssh/

[root@localhost.ssh]#mv id_rsa.pub authorized_keys 现在用到了

[root@localhost.ssh]#service sshd status -->查看是否以开启

[root@localhost.ssh]#/etc/init.d/sshd restart -->如果没有开启就执行这句话

回到客户机上吧:192.168.2.3

[root@localhost~]#ssh root@192.168.2.2

这样即可连接了

如有这个出现则:Enter passphrase for key '/root/.ssh/id_rsa': 输入你刚才为密钥加密的密码就可以了