琉璃殿:如何把一个软盘镜像HBA文件转光盘ISO格式HBA文件
来源:百度文库 编辑:偶看新闻 时间:2024/05/02 11:47:30
如何把一个软盘镜像HBA文件转光盘ISO格式HBA文件 作者:sdccf 出处:unix-cd.com 更新时间: 2008年07月17日
标题
How can I create a CD iso HBA from a floppy HBA image?
如何把一个软盘镜像的HBA文件转成光盘ISO格式的HBA文件
关键词
unixware 7.1.4 openserver 6.0.0 714 600 hba host bus adapter floppy image iso boot time loadable isl CD CD-ROM UW7 UW714 OSR6 diskette install installation driver drivers
系统版本
Release
SCO OpenServer Release 6.0.0
UnixWare 7.1.4
问题
Problem
I have a system that does not have a floppy drive and I
need to load a Host Bus Adapter (HBA) driver that I only
have as a floppy image. Is there a way that I can copy the
image to CD?
我有一台计算机没有软驱,但是我需要加载HBA驱动,我只有HBA驱动的软盘镜像文件,
有办法把这个镜像文件刻录到CD上马?
解决:
Solution
You can convert a HBA floppy image to an iso image as follows:
你可以按以下步骤把HBA的软盘镜像文件转换成光盘ISO镜像文件:
1) Log into an existing OpenServer 6.0.0 or UnixWare 7.1.4 system
as root.
1)以root用户登录已经安装的OpenServer 6.0或UnixWare 7.1.4 。
2) Download/copy the floppy image into a temporary directory, e.g.
# cd /tmp/floppy.image
2)下载/拷贝软盘镜像文件到一个临时目录,例如:
# cd /tmp/floppy.image
3) Mount the floppy image using:
# mount `marry -a /tmp/floppy.image` /mnt
3)用以下命令行挂接软盘镜像文件:
# mount `marry -a /tmp/floppy.image` /mnt
4) Use mkisofs(8) to create an iso image of the HBA as
follows:
# mkisofs -o hba.iso -r /mnt
4)用mkisofs命令创建HBA的ISO镜像文件,如下:
# mkisofs -o hba.iso -r /mnt
5) Use cdrecord(1) to burn the iso image to CDROM. e.g.
# cdrecord -v -dev=c,b,t -dao -driveropts=burnfree -speed=99 hba.iso
where c,b,t is taken from the output of the command:
# cdrecord --scanbus
The CD can then be used during the ISL of the Operating System.
5)用cdrecord命令把ISO镜像文件刻录到光盘,例如:
# cdrecord -v -dev=c,b,t -dao -driveropts=burnfree -speed=99 hba.iso
这里c,b,t可以通过如下命令的输出得到:
# cdrecord --scanbus
这样刻录的CD就可以在安装操作系统的过程中使用了。
标题
How can I create a CD iso HBA from a floppy HBA image?
如何把一个软盘镜像的HBA文件转成光盘ISO格式的HBA文件
关键词
unixware 7.1.4 openserver 6.0.0 714 600 hba host bus adapter floppy image iso boot time loadable isl CD CD-ROM UW7 UW714 OSR6 diskette install installation driver drivers
系统版本
Release
SCO OpenServer Release 6.0.0
UnixWare 7.1.4
问题
Problem
I have a system that does not have a floppy drive and I
need to load a Host Bus Adapter (HBA) driver that I only
have as a floppy image. Is there a way that I can copy the
image to CD?
我有一台计算机没有软驱,但是我需要加载HBA驱动,我只有HBA驱动的软盘镜像文件,
有办法把这个镜像文件刻录到CD上马?
解决:
Solution
You can convert a HBA floppy image to an iso image as follows:
你可以按以下步骤把HBA的软盘镜像文件转换成光盘ISO镜像文件:
1) Log into an existing OpenServer 6.0.0 or UnixWare 7.1.4 system
as root.
1)以root用户登录已经安装的OpenServer 6.0或UnixWare 7.1.4 。
2) Download/copy the floppy image into a temporary directory, e.g.
# cd /tmp/floppy.image
2)下载/拷贝软盘镜像文件到一个临时目录,例如:
# cd /tmp/floppy.image
3) Mount the floppy image using:
# mount `marry -a /tmp/floppy.image` /mnt
3)用以下命令行挂接软盘镜像文件:
# mount `marry -a /tmp/floppy.image` /mnt
4) Use mkisofs(8) to create an iso image of the HBA as
follows:
# mkisofs -o hba.iso -r /mnt
4)用mkisofs命令创建HBA的ISO镜像文件,如下:
# mkisofs -o hba.iso -r /mnt
5) Use cdrecord(1) to burn the iso image to CDROM. e.g.
# cdrecord -v -dev=c,b,t -dao -driveropts=burnfree -speed=99 hba.iso
where c,b,t is taken from the output of the command:
# cdrecord --scanbus
The CD can then be used during the ISL of the Operating System.
5)用cdrecord命令把ISO镜像文件刻录到光盘,例如:
# cdrecord -v -dev=c,b,t -dao -driveropts=burnfree -speed=99 hba.iso
这里c,b,t可以通过如下命令的输出得到:
# cdrecord --scanbus
这样刻录的CD就可以在安装操作系统的过程中使用了。
如何将.ISO软盘镜像文件写入软盘
如何把一个997MB文件夹压缩成700MB光盘镜像文件(iso)
如何把iso镜像文件打开????
如何把光盘里的iso镜像文件提取出来?
如何将两个ISO镜像文件合成一个ISO镜像文件?
我有720MB的文件,如何把它制作成700MB的ISO镜像文件刻成光盘?不把文件压缩可以吗?
如何使用iso光盘镜像
用vmware装系统需要光盘或ISO镜像,怎么把安装文件做车成镜像?
如何制作软盘的镜像文件
如何把一个997MB文件夹压缩成700MB光盘镜像文件
把ISO 镜像文件刻录到光盘上后 光盘的属性都为○字节 怎样才能正常呢
我现在想把一个3.6G的ISO镜像文件刻录到多个CD上去,应该如何刻录?
怎样把光盘文件制作成光盘境像文件如ISO
如何把几个小的iso文件刻到一个光盘上
制作光盘镜像文件ISO的软件在那里下载?
.iso这样的光盘镜像文件怎么打开
这样查看ISO镜像文件的光盘卷标?
怎样做光盘镜像ISO文件啊?
如何用矮人工具箱加载光盘镜像ISO文件
如何用矮人工具箱加载光盘镜像ISO文件
如何用光盘镜像iso文件安装红旗linux?
光盘镜像文件(iso)为什么要分cd1cd2cd3
如何制作ISO镜像文件
系统镜像文件.ISO如何应用?