如何购买外文书籍:Special clothing Shoe articles Badges--Hiking shoes

================================================== ============
[Concept]
 
       Designed for hiking and travel design and manufacture of shoes, ideal for outdoor sports. Water is the primary function of modern hiking shoes, waterproof hiking shoes, sport shoes, air permeability is generally unmatched.
================================================== ============
【Introduction】
 
       Climbing shoes are among the early leather products, shoe technology has a number of reforms, lightweight hiking shoes and mountaineering has joined the ranks of plastic shoes, leather shoes though is still the preferred option for climbers, but the shoes enough to be able to resist the rock hardness The scraping grinding, hardness can kick hard snow level, hiking also very comfortable, one-day course of activities may face upstream, mud, debris, the fallen trees, steep hard snow and rock.
       Choose the right hiking shoes is very important thing, from the appearance and sole design and purpose of consumer self-identified, the plan was how to use the applications, try a few minutes in the equipment shop, feel the adaptation of the foot: then there are all comfortable sutures are to be off the foot, so that was too tight hamstring. Can be close to the shoe heel, fixed in space, while the toes have extra space will not let you climb the forward swing tight plug on the front toes, the shoes too tight can cause poor circulation, cold feet caused by the emergence of frostbite, if the shoes are too loose can cause blisters.
-----------------------------
[Ideal hiking shoes]
1 open space to be sufficient, even wet or snow can also wear off easily.
(2) tongue shall be sufficient water intrusion.
3 from the suture line to be narrow to avoid water intrusion.
4 toes and heels to be 2 to 3 layers of leather or fabric protection.
5 front toes hard, will not buckle while wearing crampons or tap hard ice squeeze caused by a toe injury.
6 During the heel rather hard to increase the road, foot stability, the snow downhill to trod a foothold.
       The use of climbing shoes and selection considerations to maintain a balance, supporting the body, the buffering capacity cushion, hard soles, water resistance, suitable for the weight of the shoe, such as casual shoes, walking in the right light the traditional route of the road, rather than the traditional route will be Education line in the woods or climbing shoes should choose hard points, in general, lightweight shoes to provide sufficient flatness can not carry heavy backpacks on, while walking on more difficult terrain need to protect their ankle, heel and toe support force.
================================================== ============
【Type】
-----------------------------
[Jiaoshan lightweight hiking shoes]
Most of these shoes are made of nylon cloth and leather, with emphasis on ventilation and lightweight design, it resembles a soft bottom soles, so you are more comfortable in the dress, and do not have to spend too much time to adapt to it, but It is waterproof on the generally poor. Although some shoes with waterproof material and special design features to enhance it's leak-proof, but on the whole, these shoes are not suitable for long-distance hiking and adventure activities.
-----------------------------
[General hiking shoes and climbing shoes]
Use of these shoes have leather, nylon or blend, and some with Gore-Tex waterproof breathable fabric. Designed to strengthen its rugged durability, grip soles also use better design, more in some part to strengthen the heel to protect the user's ankle. Therefore, it is generally higher than the weight of light to heavy hiking shoes. In addition to full leather shoes outside, it does not cause much adjustment problems, but most of these shoes can not be used in the snow with crampons.
-----------------------------
[Heavy-duty hiking shoes]
Such material and general hiking shoes hiking shoes roughly the same, but the protection of the feet and soles of its design, the response is more complex and difficult climbing activities have been strengthened. Usually it's more thick hard soles, and some installation of steel, making it the weight of the dwarf increases. In particular, attention is also waterproof, so you have more activities to keep feet dry. However, before use of such shoes must first meet, or rush up the mountain wearing new shoes, hard sole shoes and make you easy to bend quite painful.
-----------------------------
[Dual boot]
This shoe is designed specifically for climbing poles, by definition is a combination of inside and outside the two shoes. These shoes are not only strong heavy, and expensive, but it is a weapon when climbing poles. It is made of plastic boots and warm outer material formed within the boots, both to prevent the infiltration of snow and warm features that make your feet in ice and snow will not be in bad frostbite.
-----------------------------
[Military climbing shoes]
       The shoes with special material and special process. Combination of surface materials used Pibu help, warm materials used down floc blanket. Shoe cloth composite flexible PTFE membrane process for the molding process into shoes. With excellent performance:
- Wind and warm -
Thermal material developed using an independent floc blanket down, down the use of natural resources is made to overcome the previous flakes down bloated, easy to drill down the shortcomings, and has excellent insulation. Compared with the warmth of wool felt better, the same amount of warm wool felt case weight of only 1 / 3. Thick wool felt only 2 / 3 or so. As the shoe with a layer of PTFE composite membrane. Has a good wind effect, even in windy cold weather can stop the invasion, which in this warm weather will not be significantly reduced.
- Waterproof and breathable -
The use of flexible shoes with GORE's PTFE film PTFE membrane are similar products, using a special processing method made numerous porous, much smaller than the diameter of these holes is greater than the smallest droplets and the gas molecules, so to prevent water infiltration from the outside world shoes can also distribute the resulting sweat to keep feet dry.
- Anti-bacterial deodorant -
       Shoe insoles face cloth and cloth for the antimicrobial treatment.
- Non-slip -
       Special design of the outsole pattern in two directions on the front and have excellent skid resistance. Even in the snow and ice on the road is not easy to fall, and will not silted.
================================================== ============
[Structure]
-----------------------------
[Large bottom structure]
       There are large at the end of the rubber material and sheets of woven carbon, so that when the sensitive climbing, right high, while maintaining the hardness of the sole.
 
-----------------------------
[The end of the structure]
       Supported by the piece or the whole pre-molded nylon microporous cushioning pad stays within the buffer material composition, and further enhance the stability shoes hard to ensure the hardness of torque.
-----------------------------
[Insole structure]
       Provide a soft and comfortable for the feet, the last layer of the bottom structure, good insoles would arch, heel to provide a more protected.
-----------------------------
[Ankle structure]
       This is a protection for the ankle to provide support for the design of ankle protection in the design of the structure, the use of different rules for the ankle to design the shape of the protective structure. Therefore, the structure of professional climbing shoes, mostly high waist shape, waist and shoes will generally 5 - 7.5 inches high.
-----------------------------
[Tongue structures]
       Tongue pad within the design must be high, should be thick, but also to close to the foot. Tongue should be easy to move, a good bit. Comfortable and stable, and tongue opening large enough to wear off easily. Tongue should be used while the overall folding of manufacturing production process.
-----------------------------
[Lace structure]
       Shoelace style structure, there are the traditional symmetrical and asymmetrical structure of the two structures, the former focus on aesthetics, which pay more attention with lace and toe angle.
-----------------------------
[Upper shoe-shaped]
    Comfortable soft uppers and sturdy design, will provide light weight and wear-resistant and comply with the foot-shaped structure, degree of forefoot space than reasonable, stable heel firmly. To make use of the whole manufacturing
Materials to improve the design merits, while the handling of sewing shoes shoes must be based on the pressure, under pressure to ensure that no upper distortion.
-----------------------------
[Large shading Road]
       Professional climbing shoes large shading is very particular about road design. Like F1 Formula One racing tires, in different climatic conditions and road use different tires as mine. Professional climbing shoes because the different types of road in the design of large shade different. Of course there is another situation in which even belong to a type of climbing shoes, the design of different beliefs, different costs, the end of the lines will be affected, it said, low cost, as long as non-slip on the line, the end Fine lines will not pay attention to the. But as long as shading is a professional large Road design must be the case:
1) lines before and after the feet of the front edge is designed to seize more solid ground and rock surface;
2) after the brake lines play a major role is to promote walking and effective;
3) left and right lines are used to prevent skidding;
4) The large middle part and the heel end of the front brake lines are shifted balance area;
5) The row of large shade road guide groove, efficiently snow, water, sediment discharge outsole lead to further improve the non-slip outsole, shock buffer.
================================================== ============
[Characteristics]
1, high waist, 5 - 7.5 inches, in the complex terrain of the walk, play a role in protecting the ankle support.
2, Italy Vibeam outsole, help the environment in wet and rough terrain to walk.
3, the middle structure of the shoes to be quite robust, and has excellent shock absorption cushioning structure.
4, less joints, try to use the entire upper structure materials.
5, the design of thick tongue, close to the foot, connecting with the upper folding, opening large enough to wear off easily.
6, uppers and soles for the U-shaped edge of the seal, and strengthen the structure and water resistance.
7, toe, heel are reinforced materials to protect and highlight the toe to protect feet. Heel a little drum, to strengthen the stability of the shoes. Installation in up and down steep slopes and crampons, the reduction to reduce foot pressure.
8, half-leather shoes with all the advantages and disadvantages compared:
     1) weight
     2) comfort, reducing the run-in period
     3) easy to dry after cleaning
     4) cheap
     5) walk in the difficult terrain will become worse stability than full-leather shoes. Harsh high altitude environment is not applicable.
     6) There is no half-leather waterproof structure, poor water resistance. But in walking shoes water will squeeze excluded.
     7) The life shorter than the full-leather shoes
     8) Weight stiff enough to cope with a hard object impact, can not effectively meet the crampons weight.
================================================== ============
[Maintenance]
1 try to keep shoes clean, especially after each event, at least use the brush to brush off the dust of earth shoes. Most of the material of shoes, can be neutral soap and water wash (Note Do not use detergent),
2 wet shoes will drain the water after the plug newspaper in a cool well-ventilated place, avoid the use of fire or dryer to dry, so will destroy the shoes of the material (especially Gore-Tex shoes).
3 shoes clean and clear debris, remove the other shoe cleaning.
4 other shoes dry, painted on leather protection leather oil (Gore-Tex shoes, but be careful not to protect oil on leather nylon cloth, and so will affect the permeability). Paul painted leather oil, spread evenly with your fingers slowly through the body to help absorb the oil into the leather, and special attention to the seams of the oil.
5 shoes (especially the leather part) to regular maintenance, the best habit, in the cleaning and maintenance immediately after each event.
6 shoes when not in use, placed in a dry, temperature, dust, small place, so can the shoes more durable, and maintain the best condition.
7, after all, engaged in outdoor activities shoes is a tool, in addition to provide foot comfort, but also protect the feet without causing injury.
==================================================

【Article is excerpted from: Baidu Encyclopedia】
【Network reprint / Just reference】
【Translation is by Goolge】