皮革零钱包图纸:nagios 监控笔记(二)
来源:百度文库 编辑:偶看新闻 时间:2024/05/04 15:48:47
nagios 监控笔记(二) 四、nagios服务端配置与启动 1)、文件说明nagios.cfg #nagios主配置文件
cgi.cfg #cgi配置文件
commands.cfg #命令配置文件
contacts.cfg #联系人配置文件
resource.cfg #定义插件路径文件
templates.cfg、timeperiods.cfg 组,监控时间段等配置文件
linux.cfg #用户自定义文件,监控linux主机,定义主机配置文件
windows.cfg #用户自定义文件,监控windows主机,定义主机配置文件
l-services.cfg #用户自定义文件,定义linux主机服务配置文件
w-services.cfg #用户自定义文件,定义windows主机服务配置文件 2)、cgi.cfg文件配置root@nagios#cd /usr/local/nagios/etc
vi cgi.cfg #以下是需要修改的地方
authorized_for_system_information=nagiosadmin,test
authorized_for_configuration_information=nagiosadmin,test
authorized_for_system_commands=nagiosadmin,test
authorized_for_all_services=nagiosadmin,test
authorized_for_all_hosts=nagiosadmin,test authorized_for_all_service_commands=nagiosadmin,test authorized_for_all_host_commands=nagiosadmin,test
use_authentication=0 #修改为0,不然监控访问的时候会出现以下提示It appears as though you do not have permission to view information for any of the hosts you requested...If you believe this is an error, check the HTTP server authentication requirements for accessing this CGI
and check the authorization options in your CGI configuration file.3)、配置nagios.cfg文件cfg_file=/usr/local/nagios/etc/objects/commands.cfg
cfg_file=/usr/local/nagios/etc/objects/contacts.cfg
cfg_file=/usr/local/nagios/etc/objects/timeperiods.cfg
cfg_file=/usr/local/nagios/etc/objects/templates.cfg # wb config
cfg_dir=/usr/local/nagios/etc/linux #配置linux主机加载自定义文件的目录(下面包括linux.cfg、l-services.cfg文件)
cfg_dir=/usr/local/nagios/etc/windows #配置win主机加载自定义文件的 目录(包括windows.cfg、w-services.cfg) 4)、配置commands.cfg命令配置文件define command{
command_name check_nrpe
command_line $USER1$/check_nrpe -H $HOSTADDRESS$ -c $ARG1$
}define command{
command_name check_mysql_health #定义mysql监控命令 command_line $USER1$/check_mysql_health --hostname $ARG1$ --port $ARG2$ --username $ARG3$ --password $ARG4$ --mode $ARG5$
}
define command{
command_name notify-service-by-sms #定义飞信监控命令 command_line /usr/local/tools/install/fetion --mobile=159230***** --pwd=2255*** --to=$CONTACTPAGER$ --msg-gb="$HOSTNAME$ $SERVICEDESC$ is $SERVICESTATE$ on $TIME$ result is $SERVICEOUTPUT$" $CONTACTPAGER$
}
notify-host-by-email、notify-service-by-email这二项是定义mail报警的命令,默认文件有这二项5)、配置contacts.cfg联系人配置文件define contact{
contact_name nagiosadmin use generic-contact alias Nagios Admin service_notification_period 24x7
host_notification_period 24x7
service_notification_options w,u,c,r
host_notification_options d,u,r
service_notification_commands notify-service-by-email,notify-service-by-sms
host_notification_commands notify-host-by-email
email http://www.360doc.com/mailto:test@test.com,http://www.360doc.com/mailto:test@163.com pager 1592304****
}#email 定义联系人报警mail地址#pager 定义联系人报警手机号码#notify-service-by-email、notify-service-by-sms、notify-host-by-email、要与commands.cfg命令配置文件里的相对应6)、linux.cfg主机配置文件#====================linux server=====================
define host{
use generic-host
host_name cvs-1.11
alias cvs-server
address 192.168.1.11
check_command check-host-alive
max_check_attempts 10
check_period 24x7
notification_interval 20
notification_period 24x7
notification_options d,r
contact_groups admins
name cvs-1.11 #定义名字
}
define host{
use generic-host host_name web-1.72
alias web-server
address 192.168.1.72
use cvs-1.11 #调用cvs-1.11的配置
}
7)、windows.cfg配置文件##############windows host################define host{
use generic-host
host_name windows-1.8
alias win-server
address 192.168.1.8
check_command check-host-alive
max_check_attempts 10
check_period 24x7
notification_interval 20
notification_period 24x7
notification_options d,r
contact_groups admins
name windows-1.8 #定义名字
}
define host{
use generic-host host_name windows-1.71
alias web-server
address 192.168.1.71
use windows-1.8 #调用windows-1.8配置文件
}8)、l-services.cfg定义服务配置文件define service{
use generic-service
host_name cvs-1.11 #与l-linux.cfg主机服务的名字相对应
service_description HTTP status
is_volatile 0 #类似声音警告功能关闭
check_period 24x7 #监控期限为24X7
max_check_attempts 3 #最大检测3次
normal_check_interval 1 #每一分钟检测一次
retry_check_interval 1 #间隔1分钟检测
contact_groups admins #监控组
notification_options w,u,c,r # w,u,c,r 发生这四种情况时,进行通告
notification_interval 5 # 通告间隔
notification_period 24x7 #检测时间段
check_command check_http
}check_command监控命令有check-host-alive、check_nrpe!check_disk1、check_nrpe!check_load、check_nrpe!check_total_procs、check_nrpe!check_swap等9)、w-services.cfg配置文件define service{
use generic-service
host_name windows-1.8
service_description NSClient++ Version
is_volatile 0
check_period 24x7
max_check_attempts 3
normal_check_interval 1
retry_check_interval 1
contact_groups admins
notification_options w,u,c,r
notification_interval 5
notification_period 24x7
check_command check_nt!CLIENTVERSION
}define service{
use generic-service
host_name windows-1.8
service_description E:\ Drive Space
is_volatile 0
check_period 24x7
max_check_attempts 3
normal_check_interval 1
retry_check_interval 1
contact_groups admins
notification_options w,u,c,r
notification_interval 5
notification_period 24x7
check_command check_nt!USEDDISKSPACE!-l e -w 80 -c 90
}# 如果要监控c 盘,check_nt!USEDDISKSPACE!-l c -w 80 -c 90 这里的c表示是c盘
check_command命令有check_nt!UPTIME、check_nt!MEMUSE!-w 80 -c 90、(-w 80 -c 90)为当内存使用到80%为warning警告,内存使用到90%为critical紧急,check_nt!USEDDISKSPACE!-l c -w 80 -c 90、check_nt!PROCSTATE!-d SHOWALL -l Explorer.exe等。10)、linux 客户端的安装配置与启动 tar zxvf nrpe-2.8.1.tar.gz
cd nrpe-2.8.1
./configure –prefix=/usr/local/nrpe
make
make install 10.1)、添加nagios用户组,并设置权限root@client#useradd nagios -s /sbin/nologinchown -R nagios.nagios /usr/local/nrpe10.2)、需要把nagios监控服务器里的/usr/local/nagios/libexec下面的5个文件cp到 /usr/local/nrpe/libexec目录下cp /usr/local/nrpe/libexec/check_nrpe /usr/local/nagios/libexec
cp /usr/local/nagios/libexec/check_disk /usr/local/nrpe/libexec
cp /usr/local/nagios/libexec/check_load /usr/local/nrpe/libexec
cp /usr/local/nagios/libexec/check_ping /usr/local/nrpe/libexec
cp /usr/local/nagios/libexec/check_procs /usr/local/nrpe/libexec 10.3)、配置nrpe.cfg文件mkdir /usr/local/nrpe/etc 创建目录复制nrpe解压目录下的nrpe.cfg文件以 /usr/local/nrpe/etc目录下cp /root/nrpe/nrpe.cfg /usr/local/nrpe/etc修改nrpe.cfg文件server_port=5666 #端口
server_address=192.168.1.56 #服务器IP
allowed_hosts=127.0.0.1,192.168.1.56 #充许nagios服务器IP访问 10.4)启动nrpe服务 10.4.1)、以独立守护进程启动nrpe服务/usr/local/nrpe/bin/nrpe –c /usr/local/nrpe/etc/nrpe.cfg -d 10.4.2)、检测nrpe服务是否正常启动[root@nagios nrpe]# netstat -nltp | grep nrpe
tcp 0 0 192.168.1.56:5666 0.0.0.0:* LISTEN 2233/nrpe能查看到5666这端口,说明nrpe启动正常11)、配置windows主机的nrpe服务修改c:\Program Files\NSClient++\NSC.ini文件FileLogger.dll
CheckSystem.dll
CheckDisk.dll
NSClientListener.dll
NRPEListener.dll
SysTray.dll
CheckEventLog.dll
CheckHelpers.dll
CheckWMI.dll#把前面的;分给去掉allowed_hosts=127.0.0.1/32,192.168.1.56 #添加nagios监控服务器的IP,充许nagios服务器访问打开nsclient++ 服务,选择属性---登陆---本地系统账户---(选择)充许服务与桌面交互,重启nsclient++服务net stop nsclient
net start nsclient五、启动nagios监控服务器1)、检查配置/usr/local/nagios/bin/nagios -v /usr/local/nagios/etc/nagios.cfgChecking misc settings...Total Warnings: 0
Total Errors: 0Things look okay - No serious problems were detected during the pre-flight check
2)、启动nagios服务/usr/local/nagios/bin/nagios -d /usr/local/nagios/etc/nagios.cfg/etc/init.d/nagios restart #重新启动nagios服务3)、nagios监控页面如下 [url]http://localhost/nagios[/url] -----------------------------------------------------------------------------------------------------------------------
cgi.cfg #cgi配置文件
commands.cfg #命令配置文件
contacts.cfg #联系人配置文件
resource.cfg #定义插件路径文件
templates.cfg、timeperiods.cfg 组,监控时间段等配置文件
linux.cfg #用户自定义文件,监控linux主机,定义主机配置文件
windows.cfg #用户自定义文件,监控windows主机,定义主机配置文件
l-services.cfg #用户自定义文件,定义linux主机服务配置文件
w-services.cfg #用户自定义文件,定义windows主机服务配置文件 2)、cgi.cfg文件配置root@nagios#cd /usr/local/nagios/etc
vi cgi.cfg #以下是需要修改的地方
authorized_for_system_information=nagiosadmin,test
authorized_for_configuration_information=nagiosadmin,test
authorized_for_system_commands=nagiosadmin,test
authorized_for_all_services=nagiosadmin,test
authorized_for_all_hosts=nagiosadmin,test authorized_for_all_service_commands=nagiosadmin,test authorized_for_all_host_commands=nagiosadmin,test
use_authentication=0 #修改为0,不然监控访问的时候会出现以下提示It appears as though you do not have permission to view information for any of the hosts you requested...If you believe this is an error, check the HTTP server authentication requirements for accessing this CGI
and check the authorization options in your CGI configuration file.3)、配置nagios.cfg文件cfg_file=/usr/local/nagios/etc/objects/commands.cfg
cfg_file=/usr/local/nagios/etc/objects/contacts.cfg
cfg_file=/usr/local/nagios/etc/objects/timeperiods.cfg
cfg_file=/usr/local/nagios/etc/objects/templates.cfg # wb config
cfg_dir=/usr/local/nagios/etc/linux #配置linux主机加载自定义文件的目录(下面包括linux.cfg、l-services.cfg文件)
cfg_dir=/usr/local/nagios/etc/windows #配置win主机加载自定义文件的 目录(包括windows.cfg、w-services.cfg) 4)、配置commands.cfg命令配置文件define command{
command_name check_nrpe
command_line $USER1$/check_nrpe -H $HOSTADDRESS$ -c $ARG1$
}define command{
command_name check_mysql_health #定义mysql监控命令 command_line $USER1$/check_mysql_health --hostname $ARG1$ --port $ARG2$ --username $ARG3$ --password $ARG4$ --mode $ARG5$
}
define command{
command_name notify-service-by-sms #定义飞信监控命令 command_line /usr/local/tools/install/fetion --mobile=159230***** --pwd=2255*** --to=$CONTACTPAGER$ --msg-gb="$HOSTNAME$ $SERVICEDESC$ is $SERVICESTATE$ on $TIME$ result is $SERVICEOUTPUT$" $CONTACTPAGER$
}
notify-host-by-email、notify-service-by-email这二项是定义mail报警的命令,默认文件有这二项5)、配置contacts.cfg联系人配置文件define contact{
contact_name nagiosadmin use generic-contact alias Nagios Admin service_notification_period 24x7
host_notification_period 24x7
service_notification_options w,u,c,r
host_notification_options d,u,r
service_notification_commands notify-service-by-email,notify-service-by-sms
host_notification_commands notify-host-by-email
email http://www.360doc.com/mailto:test@test.com,http://www.360doc.com/mailto:test@163.com pager 1592304****
}#email 定义联系人报警mail地址#pager 定义联系人报警手机号码#notify-service-by-email、notify-service-by-sms、notify-host-by-email、要与commands.cfg命令配置文件里的相对应6)、linux.cfg主机配置文件#====================linux server=====================
define host{
use generic-host
host_name cvs-1.11
alias cvs-server
address 192.168.1.11
check_command check-host-alive
max_check_attempts 10
check_period 24x7
notification_interval 20
notification_period 24x7
notification_options d,r
contact_groups admins
name cvs-1.11 #定义名字
}
define host{
use generic-host host_name web-1.72
alias web-server
address 192.168.1.72
use cvs-1.11 #调用cvs-1.11的配置
}
7)、windows.cfg配置文件##############windows host################define host{
use generic-host
host_name windows-1.8
alias win-server
address 192.168.1.8
check_command check-host-alive
max_check_attempts 10
check_period 24x7
notification_interval 20
notification_period 24x7
notification_options d,r
contact_groups admins
name windows-1.8 #定义名字
}
define host{
use generic-host host_name windows-1.71
alias web-server
address 192.168.1.71
use windows-1.8 #调用windows-1.8配置文件
}8)、l-services.cfg定义服务配置文件define service{
use generic-service
host_name cvs-1.11 #与l-linux.cfg主机服务的名字相对应
service_description HTTP status
is_volatile 0 #类似声音警告功能关闭
check_period 24x7 #监控期限为24X7
max_check_attempts 3 #最大检测3次
normal_check_interval 1 #每一分钟检测一次
retry_check_interval 1 #间隔1分钟检测
contact_groups admins #监控组
notification_options w,u,c,r # w,u,c,r 发生这四种情况时,进行通告
notification_interval 5 # 通告间隔
notification_period 24x7 #检测时间段
check_command check_http
}check_command监控命令有check-host-alive、check_nrpe!check_disk1、check_nrpe!check_load、check_nrpe!check_total_procs、check_nrpe!check_swap等9)、w-services.cfg配置文件define service{
use generic-service
host_name windows-1.8
service_description NSClient++ Version
is_volatile 0
check_period 24x7
max_check_attempts 3
normal_check_interval 1
retry_check_interval 1
contact_groups admins
notification_options w,u,c,r
notification_interval 5
notification_period 24x7
check_command check_nt!CLIENTVERSION
}define service{
use generic-service
host_name windows-1.8
service_description E:\ Drive Space
is_volatile 0
check_period 24x7
max_check_attempts 3
normal_check_interval 1
retry_check_interval 1
contact_groups admins
notification_options w,u,c,r
notification_interval 5
notification_period 24x7
check_command check_nt!USEDDISKSPACE!-l e -w 80 -c 90
}# 如果要监控c 盘,check_nt!USEDDISKSPACE!-l c -w 80 -c 90 这里的c表示是c盘
check_command命令有check_nt!UPTIME、check_nt!MEMUSE!-w 80 -c 90、(-w 80 -c 90)为当内存使用到80%为warning警告,内存使用到90%为critical紧急,check_nt!USEDDISKSPACE!-l c -w 80 -c 90、check_nt!PROCSTATE!-d SHOWALL -l Explorer.exe等。10)、linux 客户端的安装配置与启动
cd nrpe-2.8.1
./configure –prefix=/usr/local/nrpe
make
make install
cp /usr/local/nagios/libexec/check_disk /usr/local/nrpe/libexec
cp /usr/local/nagios/libexec/check_load /usr/local/nrpe/libexec
cp /usr/local/nagios/libexec/check_ping /usr/local/nrpe/libexec
cp /usr/local/nagios/libexec/check_procs /usr/local/nrpe/libexec
server_address=192.168.1.56 #服务器IP
allowed_hosts=127.0.0.1,192.168.1.56 #充许nagios服务器IP访问
tcp 0 0 192.168.1.56:5666 0.0.0.0:* LISTEN 2233/nrpe能查看到5666这端口,说明nrpe启动正常11)、配置windows主机的nrpe服务修改c:\Program Files\NSClient++\NSC.ini文件FileLogger.dll
CheckSystem.dll
CheckDisk.dll
NSClientListener.dll
NRPEListener.dll
SysTray.dll
CheckEventLog.dll
CheckHelpers.dll
CheckWMI.dll#把前面的;分给去掉allowed_hosts=127.0.0.1/32,192.168.1.56 #添加nagios监控服务器的IP,充许nagios服务器访问打开nsclient++ 服务,选择属性---登陆---本地系统账户---(选择)充许服务与桌面交互,重启nsclient++服务net stop nsclient
net start nsclient五、启动nagios监控服务器1)、检查配置/usr/local/nagios/bin/nagios -v /usr/local/nagios/etc/nagios.cfgChecking misc settings...Total Warnings: 0
Total Errors: 0Things look okay - No serious problems were detected during the pre-flight check
2)、启动nagios服务/usr/local/nagios/bin/nagios -d /usr/local/nagios/etc/nagios.cfg/etc/init.d/nagios restart #重新启动nagios服务3)、nagios监控页面如下 [url]http://localhost/nagios[/url]
新概念二册笔记
哪里有英语(二)笔记下载
自考 中国古代文学史(一),(二)的笔记
求自考古文史(二)的笔记
新概念英语二册六十八课后笔记
哪里可以下载新概念英语二册笔记?
二星级宾馆在安全措施上必须装监控设备吗?
监控!!!!!!!
谁知道哪有高自考英语专业综合英语二的笔记串讲。急!
高二文科的历史政治笔记用书好还是用本?
哪有自考古文史(二)和语言学的复习笔记或要点?
我想考西安交大英语专业的研究生,请问有人可以帮我找到专业课二,英语写作的笔记吗?
毛泽东思想概论笔记
周笔畅 笔记
周笔畅--笔记
社会学笔记
笔记曲谱
周笔畅 笔记
解剖笔记
周笔畅笔记
死亡笔记
变态心理学笔记
山居笔记
数学笔记