悬臂式挡土墙钢筋下料:Doll - fabric articles

来源:百度文库 编辑:偶看新闻 时间:2024/05/11 04:02:38

================================================== ================
[Materials]
(A) shearing cloth (Velboa):
    Many styles, color card company to see Rotary wide thin is very clear, very popular in recent years made bean bags, the U.S. and Europe most popular TY beanies to do is this material, we produce wrinkled bear also fall into this category.
    Check the quality to pay attention to: facial hair softness, the general quality of hair is down to poor, but there will be a little down printing shearing cloth, not serious should be acceptable. General plush (including plush fabric, wool fabric cutting), if the weight is low, it is easy to fall to the hair shaft is not up, when to pay attention to quality inspection. The amount of shearing cloth and long hair is not easy, short hair, fabric seems thin, so they will have carefully examined the general and long hair should be 2.5-3.5mm, normal is 3.00mm, curly fleece fabric can reach 5-10mm, also the relative weight high to indicate when signing the contract requirements and long hair, usually 3mm g lies 450g/Y-480g/Y, special to be noted. The other has hair to shearing cloth.
=========================
(B) the plush fabric:
A, A yarn (also known as ordinary yarn, BOA material), divided into:
Bright yarn: General usually shiny, light hair in the separation of yin and yang to the different available surface.
Matt yarn: the dumb-colored, almost no yin and yang side.
---------------------
B, V yarn (also known as special yarn, T-590, Vonnel) have flat shearing cloth (Even Cut) and the length of the hair (Uneven cut), hair length about the 4-20mm range, are mid-range material.
 
---------------------
C, Hipile (Shanghai, plush): hair length in the range 20-120mm ,20-45mm can be done within the scope of any hair length, 45mm 65mm and above, only 120 (110) mm, length of hair is due to the quality of the original yarn Hipil influence is obvious, so we should be required to use the Japanese Mitsubishi plush factory level and above the original yarn, straight hair to be smooth, easy to curl.
---------------------
D, the other:
1, plush roll (roll Trichodesmium):
① Tumbling boa, A yarn curl: most granular wool, lamb wool, or hair root is a bundle, the above volume open. Usually used for more classical taste of toys, long hair done up to 15mm;
Shanghai Curly relatively cheaper.
② Tumbling HP Shanghai Curly: long hair is usually long, loosely curled over effects, there are many styles to choose from.
2, super soft material: already in use, the material is very soft; note that the original yarn different from the price will be different.
3, there DDF: HP is a kind of stiff, high-grade material, usually blending.
E, plush printed material including:
1, printing;
2, jacquard;
3, Tippy printing (tip-dyed): (as mixed wool glasses open book);
4, variegated; 5, two-color (two tone) and so on.
---------------------
Note: Check to see quality plush fabric:
     1, density, weight plush, smooth feel is (that is exposed at the end of yarn is not strictly serious facial hair erect or lodging, this weight and the plush plant a greater impact on the quality of finishing);
     2, the original quality of the yarn and woven supple quality impact results;
     3, shearing wool of high quality and impact;
     4, staining accuracy of the color;
     5, the larger the surface area of ??the hair to see the effect: side effect is hair down dense, erect, supple, with all the normal indentation, wave lines, chaotic hair to the other anomalies.
    These aspects can be used to determine the basic quality of good or bad.
    Of course, different grades of products have different requirements, we should learn to accept the judge to grasp the scale, the safest approach is to first confirm the sheet, then orders, according to the plate receipt.
Every year, new plush plants normally develop different styles, feel, wool, curly, rolling beam effect for new varieties of toy factory to design new models, we should take the initiative to find out the name of the new varieties of specification properties, in order to make an accurate classification and applications.
=========================
(C) honey velvet (velour): similar to the shearing cloth, but in the 1.5-2mm long hair around the elastic relatively large shearing cloth; no hair to.
=========================
(D) T / C fabric: (Composition is 65% Polyster, 35% Cotton) in three:
1) 110 * 76: thick, used in calico, or the products require a higher density, easy to loose the mouth).
2) 96 * 72: second; density than thin.
3) 88 * 64: the third. As organizations loose, it is usually set on the material are required to paste into the light, so easy to loose sewn edge, resulting in population explosion.
    2) and 3) is commonly used to do interlining. When used according to product quality, use to choose.
=========================
(E) side-lun cloth (Nylex, Tricot):
    Was divided into normal side-lun cloth (100% Polyster) and nylon side-lun cloth (Nylon), are usually common type. Production, cut pieces silk screen, embroidery is more easily, pieces of silk
Fleece must be under the control of the hair length is not long (usually less than 1mm), or have difficulty printing, color is not easy to penetrate, easy to fade.
  Nylon side-lun cloth rarely used, only in special product requirements when using a strong adhesive force, as we produced prior to the beach hat. And set a minimum number of material, set in Korea, only be considered a special product.
=========================
(F) cotton (100% Cotton): high-end cloth used to make more than the T / C fabric thick.
=========================
  
(G) Ji flannel (Felt): pay attention to the thickness and hardness of soft, sub-ordinary polyester and acrylic two, we usually used an ordinary polyester, the hard, thick
In about 1.5mm, acrylic is very soft, easily broken loose tissue, commonly used in the gift, and less for toys.
=========================
(H) PU leather: Polyester is a kind of leather is not leather. Note at the end of a different fabric, fabric thickness will be different.
      Note: Now that all the toys can not use PVC materials, PVC contains excessive levels of toxic due to the deadly element, so the purchase is not material to the attention of the nature of PVC. As for the packaging material, and some guests to accept the PVC material, and some do not accept to great attention.
=========================
(Ix) twill (Heavier T / C): is divided cotton or T / C, thick lines clearly visible.
=========================
(X) by Shibu: by count measure texture; should be based on product quality and use to select.
=========================
(K) knitted fabric: the number of points according to the quality of supporting weight, sub-cotton or T / C, cloth greater flexibility.
=========================
(Xii) e-velvet: thin and bright, but soft enough facial hair.
=========================
(Xiii) Fleece fabric (polar fleece): sub-sided Fleece, double-sided Fleece, soft, but greater flexibility.
=========================
(Xiv) Velvet: There are several grades, and e is the difference between velvet soft, the price is relatively high.
=========================
(Xv) flocking fabric (flocking Material): sub-sided, double-sided, single-sided flocking fabric if at the end of different thickness and hardness of different prices are also different.
=========================
(Xvi) Satin (Satin): usually not easy to do sewing, too soft and easy to take the yarn.
=========================
(Xvii) washing cloth, fold cloth (Nylon Taffeta): cloth with wrinkles, as can be washed, some products will spend, but sewing is not good to do).
=========================
(R) nylon cloth: minutes
Lining: 170T, a nylon cloth, thin, cheap, you can consider doing the bag liner; ordinary nylon fabric: 190T; thick nylon fabric: 210T; Oxford: 420T above.
=========================
(Xix) terry: sub cotton (Cotton): terry higher, it is rough, with a toy on the end use thick cloth, and the cotton is not easy to run out.
T / C type: terry fine, smooth, and more for baby products, bath products, etc., can not pay attention to the bottom through the cotton cloth should be thick.
(Xx) Other: denim, Flash cloth
================================================== ================
【Ingredients】
(A) eyes: eyes divided plastic, crystal eyes, cartoon eyes, eyes and other activities.
(B) the nose: the nose is divided into plastic, flocking nose, including the nose, matt nose and so on.
(C) Ribbon (Ribbon): Specifies the color, a small number, or specify style, note the number of orders.
(D) of plastic bags: (PP bags commonly used in U.S. products, cheaper European products must be PE bags; PE bags, PP bags transparency is good enough, but more likely to wrinkle and PP bags and break), PVC only be used as a packaging material (DEHP content must be limited to 3% / square or less.), shrink film used for color box packaging, as a protective film.
(E) carton: (two types)
Double Lenz A = B, A = C, B = B, B = C, C = C, three flute, A three B also has (such as the use of such backpack series), unless the customer specifies, usually export carton are used A = B, export of small size can be considered outside the box B = B or B = C. Order cartons before; should choose genuine suppliers first confirm the carton plant to provide the sections of the paper, note that each may be different, to choose genuine, but also should pay attention to the quality of each batch of stock to prevent inferior goods posing as genuine commercial supply, in addition to weather, humidity, rainy weather and other factors may also cause adverse effects on paper.
Single flute B33, C33, etc. are usually done within the box, or the turnover of domestic delivery cartons, corrugated outer paper and the quality of the decision within a carton stiffness.
(F) Cotton: sub-7D, 6D, 15D, was divided into A, B, C class, we usually used 7D / A level, 6D less common. Low-end products or fortress very full hard product Applied 15D / B or C. 7D is very smooth and elastic, 15D more stiff.
According to fiber length, was divided 64MM and 32MM cotton. The former is used to hand-washed cotton, which is used to machine washed cotton.
General practice is to loose yourself into the raw cotton, cotton, loose cotton workers to ensure correct operation, there is sufficient number of loose cotton, so cotton is fully extended to achieve a good flexibility. If the loose cotton to be ineffective, would cause great amount of cotton waste.
(G) particles: (points PP, PE), the diameter should be greater than or equal 3MM, smooth uniform particles. Exports to Europe are usually more environmentally friendly with PE, exports to the U.S. in addition to customer specific requirements, can be PP or PE, PP cheaper. In addition to the guests specified, all particles must use export products wrapped in bags.
(Viii) plastic accessories: ready-made plastic parts, the body can not change, such as size, size, shape, etc., or the need to open molds, plastic molds generally cost you a few thousand dollars to several thousand dollars, depending on die size, process difficult, given the choice of mold material, so orders are normally produced the following output in the three hundred thousand, have another account tooling costs.
(9) (color) printed matter: including box, tags, stickers, color printing and the price level is directly related to the number of orders, if the order is small, then a small number of printing paper, color likely to cause large, uneven color , the manufacturers increased the proportion of loss, it must be priced high.
 Implementation of the print price to pay attention to whether to include film, proofing (print-proof), a plastic finish (coating) and other expenses, specify the pattern of the customer, the best film and color provided by the customer is issued, and the color scale (the four-color CMYK ratio), this would speed up the playing board speed and accuracy.
(J) cloth labels, woven labels like: must be 21 pounds tension, it is more use thick belt.
(K) with a variety of colors of cotton, ribbon, wire rope through, rubber categories: to distinguish between the different texture of raw materials, product quality and cost.
(Xii) velcro, buckle type, zipper class: Velcro cement degree of attention to high (especially in the functional requirements of a higher purpose, of course).
 
================================================== ================

【Article is excerpted from: Baidu Encyclopedia】
【Network reprint / Just reference】
【Translation is by Goolge】